kvmoregon.blogg.se - Nck box spreadtrum module

A Sandisk, Kingston, or Kingmax U disk is recommended. Step 1: Prepare a U disk with a capacity of at least 8 GB. Note: the SD card keep in connecting until the screen displays “Update success”.įor EMUI operating system, shows as below: After the progress icon is fully loaded, the phone will restart automatically, and the upgrade is completed. Step 6: During the upgrade, a progress icon will be displayed. If the product do not have the entity VOLUME key, just press the POWER key for more than five times when power on, then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 5: Power off the phone, insert the microSD card, andįor EMUI 12.x,press the VOLUME UP key and the POWER key at the same time, then it will enter recovery interface, and then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 4: Check that the directory and files are intact in the SD card root directory. Copy the dload document to the root directory in the microSD card. Step 3: Check that the directory of all files is intact in dload. Step 2 (optional): Format the SD card to ensure the capacity is sufficient. A Sandisk, Kingston, or Kingmax SD card is recommended. Step 1: Prepare a SD card with a capacity of at least 8 GB.

You should get a Done message.How to update firmware Huawei & Honor device ? Version-1: SD card Forcible Upgrade Now the device should get detected and FRP removal should commence.

For some SPD devices, it is volume up button so sure to try boot. Now you power off the device, still with battery in then you hold the volume down button then connect to PC via USB cord. Under Job, you select remove FRP and now you click Do Job. If you can't find yours just select generic CPU. Under Models, you select based on your Model. Now, once it comes up you come under the Flash Mode Utils. Now, I'm waiting for the dashboard to come up, I've launched it.

You also need to have installed Spreadtrum USB drivers. You need to have the hardware box and have installed (setup) the dongle. Quote:In this video tutorial, I'll be explaining how to bypass Factory Reset Protection or FRP on a Spreadtrum Android device using NCK box.

If you're using a loader version (no hardware box or dongle required) then your antivirus might flag it.

Running the module without the hardware won't work

NCK Pro box ideally requires a hardware box or dongle to work.

You should get a Done message once FRP lock has been bypassed.

The device should get detected and FRP removal commence.

Its Volume up button for some SPD devices

Power off the device then connect to PC (still with battery in) while holding volume down button.

Select the chipset from the second dropdown.

Under Models, choose the device's brand or Generic if not on the list.